Wednesday 17 April 2013

DIY Beauty Sleep Eye Mask



This week Anna is sharing her DIY Eye Mask tutorial with us, I'm already a fan after seeing this for real and I want one, now. Prepare to say goodbye to eye-bags and hello to beauty sleep. You'll of course need a dramatic peignoir and fluffy, heeled slippers to match for your boudoir attire. Enjoy the sewing x

Gwen likes the eye mask too!



Beauty Sleep Eye Mask


A lovely and unique home made present, perfect for using up scrap sized pieces of material.

You will need:

Materials:
 A piece of patterned (or plain) outer fabric, approx 25cm/15cm.
A piece of silk, or soft cotton for the lining, approx 25cm/15cm.
A scrap piece of dark coloured fabric (any) to block out the light, approx 25cm/15cm.
A piece of padding, roughly 5mm thick, approx 25cm/15cm
100cm of 25mm wide ribbon for the head tie.
60cm of bias binding, to compliment the outer fabric, for the edges.
Other bits of ribbon or bows for decoration.
Coordinating threads.

Tools:
 Sewing Machine
Scissors
Hand sewing needle
Pins
Pen
Paper to make pattern.




1.
Make the eye sleep mask pattern by folding in half a piece of paper and drawing half a mask shape. Think half a pair of Jackie O or Avaiator sunglasses but deeper in the middle. Don’t make any of the curves too tight or it will be difficult binding. Cut out your pattern.

2.
Draw around your pattern and cut out 1 x outer, 1 x lining, 1 x dark fabric and 1 x padding. Cut the ribbon for the head tie into 2 x 50cm pieces.



3.
Sandwich together the outer fabric / padding / dark fabric / lining and pin all 4 layers in place. Pin the head tie ribbon on the lining side to the edges, make sure this is level.



4.
On the lining side, starting at either side of the mask, open out one side of the bias binding and line up the edge with the edges of the mask. Stitch along the fold of the binding using your sewing machine, running all around the mask shape - fold the binding over at the start and overlap it at the finish. Remove the pins.


5.
Turn to the outside of the mask and fold around the other edge of the binding, covering the raw edges of the material layers and use the stitch line as a guide to line the binding up to, try to just cover it. Stitch around the mask on machine, backstitch at the start/finish to secure.



6.
Add any additional decoration, bows/lace/trim using hand sewing needle/thread - this could be elaborate as you want - be creative…..Sleep well xx

No comments:

Post a Comment